TM 5-2410-241-23-3
0241
RECEIVER DRYER HOSE TO CONDENSER COIL REMOVAL
000241
N OT E
Tag hoses to aid installation.
Clean exterior of hoses before removal to prevent contamination.
Cap and plug all hoses and lines to prevent contamination and leaks.
1. Loosen nut (Figure 3, Item 2) and disconnect hose (Figure 3, Item 1) from condenser coil (Figure 3, Item 4).
2. Remove O-ring (Figure 3, Item 3) from hose (Figure 3, Item 1). Discard O-ring.
3. Disconnect quick disconnect fitting (Figure 3, Item 6) from receiver dryer (Figure 3, Item 5).
4. Loosen nut (Figure 3, Item 7) and disconnect hose (Figure 3, Item 1) from quick disconnect fitting (Figure 3,
Item 6).
5. Remove O-ring (Figure 3, Item 8) from hose (Figure 3, Item 1). Discard O-ring.
6. Remove nut (Figure 3, Item 10), washer (Figure 3, Item 11), clip (Figure 3, Item 12), and hose (Figure 3,
Item 1) from bracket (Figure 3, Item 9).
7. Remove bolt (Figure 3, Item 16), washer (Figure 3, Item 15), clip (Figure 3, Item 13), and bracket (Figure 3,
Item 14) from hose (Figure 3, Item 1).
8. Remove hose (Figure 3, Item 1) from machine.
Figure 3. Receiver Dryer Hose to Condenser Coil.
0241
END OF TASK