TM 5-2410-240-10
0012
Table 1. Preventive Maintenance Checks and Services (PMCS) - Continued
LOCATION
ITEM TO BE
CHECKED
OR
EQUIPMENT NOT
ITEM
MAN-
SERVICED
PROCEDURE
READY/AVAILABLE IF:
NO.
INTERVAL HOURS
38
After
Overall View
a. Check under machine for
Class III oil or hydraulic fluid
evidence of fluid leakages such as leak, or any fuel or coolant
(Cont.)
oil, coolant, fuel, or hydraulic fluid. leak is evident.
Damage that would impair
b. Check machine for obvious
operation is evident.
damage that would impair
operation.
LEFT SIDE
39
After
Dozer Blade,
a. Check dozer blade, cutting
Damage, missing, or
Cutting Edges,
edge, and end bits for damage or
excessively worn
End Bits, and
excessive wear.
components that would
Blade
impair operation is evident.
b. Check blade mounting at
Mounting
C-frame for debris, damage, or
missing components.
40
After
Overall View
a. Check left side of machine for
Class III leaks or damage
evidence of leakage or damage.
that would impair operation
are evident.
b. Check for evidence of fluid
leakage or damage at front belly
guard.
41
After
Lights
Check front flood lights for missing Missing or damaged
or damaged components.
components if required for
mission.
42
After
Angle
a. Check blade angle and lift
Damaged components or
Cylinder, Lift
cylinders for debris, leakage or
Class III leaks.
Cylinder Lines
damage.
and Fittings
b. Check angle and lift cylinder
lines and fittings for leakage, or
damage.
