TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0005-06 Cylinder #5 Injector Current
7. Disconnect ECM harness con-
Above Normal Continued
nector E-C1 (WP 0018,
Figure 102) from engine ECM
J2.
8. Using digital multimeter
Continuity - Engine control wiring
(WP 0283), test for continuity
harness is shorted. Replace
between engine ECM har-
engine control wiring harness
ness connector E-C1
(WP 0052). Verify proper operation
(WP 0018, Figure 102) termi-
of machine (TM 5-2410-240-10).
nal 63 and all other terminals
No Continuity - Proceed to step 9.
in engine ECM harness con-
nector E-C1 (WP 0018,
Figure 102).
9. Using digital multimeter
Continuity - Engine control wiring
(WP 0283), test for continuity
harness is shorted. Replace
between engine ECM har-
engine control wiring harness
ness connector E-C1
(WP 0052). Verify proper operation
(WP 0018, Figure 102) termi-
of machine (TM 5-2410-240-10).
nal 63 and ground.
No Continuity - ECM is faulty.
Replace engine ECM (WP 0049).
Connect E-C14 (WP 0018,
Figure 113) to F-C1 (WP 0018,
Figure 146) at valve cover base.
Verify proper operation of machine
(TM 5-2410-240-10).
Test Step 3: Test forward fuel
injector harness.
1. Turn ignition and battery dis-
connect switch to OFF posi-
tion (TM 5-2410-240-10).
2. Remove valve cover
(WP 0104).
3. Disconnect forward fuel injec-
tor harness terminal F-T11
and terminal F-T22 (WP 0018,
Figure 271) from fuel injector
#5.
4. Using digital multimeter
Continuity - Forward fuel injector
(WP 0283), test for continuity
harness is shorted. Replace for-
between F-C1 (WP 0018,
ward fuel injector harness
Figure 146) harness connec-
(WP 0104). Verify proper operation
tor terminal 3 and all other ter-
of machine (TM 5-2410-240-10).
minals in F-C1 (WP 0018,
No Continuity - Proceed to step 5.
Figure 146) harness connec-
tor.
0019-45