TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
N OT E
E360-2 Low Engine Oil Pressure -
Derate
The warning will be cancelled if the oil pressure rises 3 psi
(21 kPa) above set point for 20 seconds.
1. Using Messenger (WP 0015),
E360-2 Present - Proceed to step
verify presence of event code
2.
E360-2.
Oil Low - Add oil as needed
2. Check oil level in engine
(WP 0085).
(WP 0085).
Oil Level OK - Proceed to step 3.
3. Check actual engine oil pres-
Oil Pressure Low - Replace
sure with calibrated test
engine oil pump (WP 0100). Per-
gauge, refer to Engine Oil
form Engine Oil Pressure Test
Pressure - Test (WP 0025).
again (WP 0025). If oil pressure
remains low, replace engine
(WP 0051).
Oil Pressure OK - Replace oil
pressure sensor (WP 0053). Ver-
ify proper operation of machine
(TM 5-2410-240-10).
E360-3 Low Engine Oil Pressure -
1. Using Messenger (WP 0015),
E360-3 Present - Proceed to
Shutdown
verify presence of event code
step 2.
E360-3.
2. Check oil level in engine
Oil Low - Add oil as needed
(WP 0085).
(WP 0085).
Oil Level OK - Proceed to step 3.
Oil Pressure Low - Replace
3. Check actual engine oil pres-
engine oil pump (WP 0100). Per-
sure with calibrated test
form Engine Oil Pressure Test
gauge, refer to Engine Oil
again (WP 0016). If oil pressure
Pressure - Test (WP 0025).
remains low, replace engine
(WP 0051).
Oil Pressure OK - Replace oil
pressure sensor (WP 0053). Ver-
ify proper operation of machine
(TM 5-2410-240-10).
E361-1 Present - Proceed to
E361-1 High Engine Coolant Temper- 1. Using Messenger (WP 0015),
step 2.
ature - Warning
verify presence of event code
E361-1.
2. Verify cooling system is oper-
Cooling System Restricted or
ating correctly, refer to Table
Obstructed - Clean as directed.
1, Coolant Temperature is Too
Cooling System Damaged -
High, Malfunction 2, in this
Replace as directed in Malfunc-
work package.
tion 2.