TM 5-2410-240-23-2
0093
REMOVAL CONTINUED
2. Remove damper (Figure 2, Item 4) and pulley (Figure 2, Item 3) from hub (Figure 2, Item 1).
3. Remove three bolts (Figure 2, Item 5), block (Figure 2, Item 2), and hub (Figure 2, Item 1) from machine.
Figure 2. Damper and Crankshaft Pulley.
0093
END OF TASK
CLEANING AND INSPECTION
00093
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
