TM 5-2410-240-23-2
0103
INSTALLATION CONTINUED
000103
8. Clean and lubricate 14 cylinder head bolts (Figure 15, Item 2) with clean engine oil and install on cylinder head
(Figure 15, Item 1).
9. Tighten cylinder head bolts in sequence shown to 37 lb-ft (50 Nm).
10. Tighten cylinder head bolts in sequence shown to 74 lb-ft (100 Nm).
11. Tighten cylinder head bolts in sequence shown an additional 225 degrees.
Figure 15. Cylinder Head Tightening Sequence.
0103