TM 5-2410-240-23-2
0132
INSTALLATION
000132
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
This procedure will install one hydrostatic pump solenoid valve. Follow the same
procedure for additional hydrostatic pump solenoid valves.
Install electrical harness as noted during removal.
1. Install valve (Figure 3, Item 4) and four bolts (Figure 3, Item 5) on machine.
2. Install solenoid (Figure 3, Item 3) and cap (Figure 3, Item 1) on valve (Figure 3, Item 4).
3. Position harness (Figure 3, Item 2) on machine.
4. Install new tiedown strap (Figure 3, Item 6) on solenoid valve (Figure 3, Item 3).
5. Connect connector (Figure 3, Item 7) to solenoid valve (Figure 3, Item 3)
Figure 3. Hydrostatic Pump Solenoid Valve.
0132
END OF TASK
