TM 5-2410-240-23-2
0155
INSTALLATION CONTINUED
N OT E
Install electrical connectors as noted during removal.
30. Connect platform harness (Figure 26, Item 3) to chassis harness (Figure 26, Item 2) and tighten screw
(Figure 26, Item 4).
31. Install clamp (Figure 26, Item 8) on harness (Figure 26, Item 7).
32. Install clamp (Figure 26, Item 8), washer (Figure 26, Item 6), and bolt (Figure 26, Item 5) on bracket (Figure 26,
Item 9).
33. Connect and lock platform harness (Figure 26, Item 10) to chassis harness (Figure 26, Item 1).
Figure 26. Harness Connectors and Retaining Hardware Above Hydraulic Filters.
0155
END OF TASK
FOLLOW-ON TASKS
000155
1. Install left rear access panel (WP 0193).
2. Install right rear access panel (WP 0190).
3. Install right lower door hinge (WP 0255).
4. Install left lower door hinge (WP 0255).
5. Install front cab floor plates (WP 0205).
6. If arctic kit heater equipped, install arctic kit heater switch and heater harness (WP 0277).
7. Install batteries (WP 0142).
8. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0155-21/(22 blank)
