TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Front Cylinder Mounted
84. Using digital multimeter (WP
1. If continuity is found, proceed to
Flood Lamp(s) Do Not
0296), test for continuity between
step 85.
Work - Continued
pin 1 and pin 3 on engine harness
2. If continuity is NOT found, replace
connector V-C1 (WP 0018,
platform harness (WP 0209) and
Figure 12).
instrument panel harness (WP
0260). Replace Fuse #8 (TM 5-
2410-241-10). Ensure all harness
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
85. Disconnect engine harness con-
nector V-C15 (WP 0018, Figure
99) from front lighting harness
connector G-C1 (WP 0018,
Figure 98).
86. Using digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 87.
pin A and pin B on front lighting
2. If continuity is NOT found, replace
harness connector G-C1 (WP
main engine wiring harness (WP
0018, Figure 98).
0055). Replace Fuse #8 (TM 5-
2410-241-10). Ensure all harness
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
87. Disconnect left front flood lamp
harness connector GA-C1 (WP
0018, Figure 94) from front light-
ing harness connector G-C2 (WP
0018, Figure 95).
88. Using digital multimeter (WP
1. If continuity is found, replace left
0296), test for continuity between
front flood lamp harness (WP
pin 1 and pin 2 on left front flood
0154). Replace Fuse #8 (TM 5-
lamp harness connector GA-C1
2410-241-10). Ensure all harness
(WP 0018, Figure 94).
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
2. If continuity is NOT found, pro-
ceed to step 89.
89. Disconnect right front flood lamp
harness connector GC-C1 (WP
0018, Figure 96) from front light-
ing harness connector G-C3 (WP
0018, Figure 97).
0022-13
