TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
ROPS Mounted Forward
10. Inspect inside of left ROPS-
1. If corrosion or damage is found,
Facing Flood Lamp(s)
mounted forward facing flood
replace left ROPS-mounted for-
Do Not Work - Continued
lamp for corrosion and damage.
ward facing flood lamp assembly
(WP 0252). Ensure all harness
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
2. If corrosion and damage is NOT
found, proceed to step 11.
11. Using digital multimeter (WP
1.
If continuity is found, proceed to
0296), test for continuity between
step 12.
pin 1 and terminal 4 on left ROPS- 2.
If continuity is NOT found, replace
mounted forward facing flood
left ROPS-mounted forward fac-
lamp (WP 0018, Figure 180).
ing flood lamp assembly (WP
0252). Ensure all harness con-
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
12. Using digital multimeter (WP
1.
If continuity is found, replace left
0296), test for continuity between
ROPS-mounted forward facing
pin 2 and terminal 3 on left ROPS-
flood lamp bulb (WP 0252).
mounted forward facing flood
Ensure all harness connectors
lamp (WP 0018, Figure 180).
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
2. If continuity is NOT found, replace
left ROPS-mounted forward fac-
ing flood lamp assembly (WP
0252). Ensure all harness con-
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
13. Turn main light switch to OFF
position (TM 5-2410-241-10).
14. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
15. Disconnect left rear flood lamp
harness connector TK-C3 (WP
0018, Figure 103) from fuel tank
harness connector TW-C3 (WP
0018, Figure 105).
0022-15
