TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Front Cylinder Mounted
77. Using digital multimeter (WP
1. If continuity is found, replace main
Flood Lamp(s) Do Not
0296), test for continuity between
engine wiring harness (WP 0056).
Work - Continued
pin B and pin A on front lighting
Ensure all harness connectors
harness connector G-C1 (WP
are reconnected. Verify correct
0018, Figure 98).
operation of machine (TM 5-2410-
241-10).
2. If continuity is NOT found, replace
front lighting harness (WP 0167).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
78. Disconnect right front cylinder-
mounted flood lamp harness con-
nector GC-C2 (WP 0018,
Figure 93) from right front cylin-
der-mounted flood lamp.
79. Disconnect left front cylinder-
mounted flood lamp harness con-
nector GA-C2 (WP 0018,
Figure 92) from left front cylinder-
mounted flood lamp.
80. Disconnect platform harness con-
nector MA-C3 (WP 0018, Figure
21) from fuse panel harness con-
nector A-C1 (WP 0018,
Figure 22).
81. Turn main light switch to Head-
light position (TM 5-2410-241-10).
82. Using digital multimeter (WP
1. If continuity is NOT found, replace
0296), test for continuity between
fuse panel harness (WP 0176).
pin 25 on platform harness con-
Replace Fuse #8 (TM 5-2410-
nector MA-C3 (WP 0018, Figure
241-10). Ensure all harness con-
21) and machine ground.
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
2. If continuity is found, proceed to
step 83.
83. Disconnect engine harness con-
nector V-C1 (WP 0018, Figure 12)
from platform harness connector
MA-C22 (WP 0018, Figure 11).
0022-12
