TM 5-2410-241-23-2
0117
REMOVAL CONTINUED
2. Remove eight bolts (Figure 2, Item 1), washers (Figure 2, Item 2) and two universal joints (Figure 2, Item 4)
from main drive shaft (Figure 2, Item 3).
Figure 2. U-Joint.
0117
END OF TASK
CLEANING AND INSPECTION
000117
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
INSTALLATION
000117
1. Install two universal joints (Figure 2, Item 4), eight washers (Figure 2, Item 2), and bolts (Figure 2, Item 1) on
main drive shaft (Figure 2, Item 3). Tighten bolts to 40 lb-ft (54 Nm).