TM 5-2410-241-23-3
0211
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Control valve weighs approximately 100 lb (45 kg).
11. Remove cab (WP 0245).
12. Attach bracket link (Figure 6, Item 4), bolt (Figure 6, Item 5), and lifting device on control valve assembly
(Figure 6, Item 1).
13. Using lifting device, remove three bolts (Figure 6, Item 3), washers (Figure 6, Item 2), and control valve
assembly (Figure 6, Item 1) from machine.
14. Place control valve assembly (Figure 6, Item 1) on flat level surface.
15. Remove lifting device and bracket link (Figure 6, Item 4) from control valve assembly (Figure 6, Item 1).
Figure 6. Control Valve Mounting.
0211
END OF TASK
