TM 5-2410-241-23-3
0211
REMOVAL
000211
WARN I N G
Contact with oil can damage skin. Wear gloves when handling oil. If oil contacts skin, wash
it off immediately.
Lubricating oil is very slippery. Immediately wipe up any spills.
Failure to follow these warningsmay cause injury to personnel.
N OT E
Care must be taken to ensure that fluidsare contained during performance of inspection,
maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid
with suitable containers before opening any compartment or disassembling any
component containing fluids.
Dispose of all fluids accordingto local regulations and mandates.
Perform disassembly on a clean surface.
Clean exterior of component to prevent contamination.
Plug all lines, hoses and tubes to prevent contamination and leaks.
Tag and mark all hoses and lines to aid installation.
1. Remove eight bolts (Figure 1, Item 4), washers (Figure 1, Item 5), two flanges (Figure 1, Item 1), and hose
(Figure 1, Item 2) from control valve (Figure 1, Item 7) and hydraulic tank (Figure 1, Item 3).
2. Remove two O-rings (Figure 1, Item 6) from hose (Figure 1, Item 2). Discard O-rings.
Figure 1. Top Hose.
0211
