TM 5-2410-241-23-3
0278
CLEANING AND INSPECTION
000278
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
INSTALLATION
000278
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Use suitable lifting device to support the ripper tilt cylinder. The tilt cylinder weighs
approximately 250 lb (113 kg).
1. Install suitable lifting device on ripper tilt cylinder (Figure 5, Item 1).
2. Position ripper tilt cylinder (Figure 5, Item 1) on machine.
Figure 5. Ripper Tilt Cylinder Support.
0278
