TM 5-2410-240-23-2
0075
FUEL INJECTION PUMP INSTALLATION
00075
N OT E
New fuel injection pumps are supplied locked in correct position. If fuel injection pump has
been unlocked and timing lost, follow steps 1-3 to set pump timing. If fuel injection pump is
in time, go to step 4.
1. Loosen and back off locking screw (Figure 9, Item 4) on fuel injection pump (Figure 9, Item 3), and install timing
tool as follows.
a. Install timing tool (Figure 9, Item 6) on fuel injection pump (Figure 9, Item 3).
b. Align lever (Figure 9, Item 1) with key slot (Figure 9, Item 2) and engage lever.
c.
Use lever (Figure 9, Item 1) to rotate shaft until locking pin (Figure 9, Item 7) can be inserted into hole
(Figure 9, Item 5).
N OT E
Locking pin must insert into hole with no resistance.
Fuel injection pump must remain locked until procedure instructs to unlock fuel pump.
2. If locking pin (Figure 9, Item 7) inserts with no resistance, tighten locking screw (Figure 9, Item 4) on fuel
injection pump (Figure 9, Item 3).
3. Remove timing tool (Figure 9, Item 6) from fuel injection pump (Figure 9, Item 3).
Figure 9. Fuel Injection Pump.
0075