TM 5-2410-240-23-2
0108
REMOVAL
000108
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
Mark position and routing of hoses and lines to aid installation.
Cap hydraulic lines and fittings.
1. Remove nut (Figure 1, Item 13), two washers (Figure 1, Item 12), bolt (Figure 1, Item 14) and clamp
(Figure 1, Item 15) from line (Figure 1, Item 7).
2. Remove line (Figure 1, Item 3) from fitting (Figure 1, Item 2).
3. Remove fitting (Figure 1, Item 2) from pump.
4. Remove two O-rings (Figure 1, Item 1) from fitting (Figure 1, Item 2). Discard O-rings.
5. Remove dual tiedown strap (Figure 1, Item 4) from line (Figure 1, Item 3). Discard tiedown strap.
6. Remove line (Figure 1, Item 7) from fitting (Figure 1, Item 6).
7. Remove fitting (Figure 1, Item 6) from manifold (Figure 1, Item 11).
8. Remove two O-rings (Figure 1, Item 5) from fitting (Figure 1, Item 6). Discard O-rings.
9. Remove hose (Figure 1, Item 10) from fitting (Figure 1, Item 8).
10. Remove O-ring (Figure 1, Item 9) from fitting (Figure 1, Item 8). Discard O-ring.
0108-2