TM 5-2410-241-23-2
0123
TEST AND ADJUSTMENT CONTINUED
10. Start engine. Powertrain oil must be at operating temperature.
11. With park brake disengaged and steering control lever in the NEUTRAL position, run engine at HIGH IDLE
(2100 RPM).
12. Pressure gauge should read 75 10 psi (515 70 kPa).
13. With park brake disengaged and steering control lever in the NEUTRAL position, run engine at LOW IDLE
(800 RPM).
14. Pressure gauge should read 55 10 psi (380 70 kPa).
15. If pressures are incorrect, repeat steps 8 thru 14.
16. Remove pressure gauge from fitting (Figure 6, Item 1).
17. Install cap (Figure 6, Item 2) on fitting (Figure 6, Item 1).
Figure 6. Test Port.
0123
END OF TASK
FOLLOW-ON TASKS
000123
1. Verify correct operation of machine (TM 5-2410-241-10).
2. Install front floor plate (WP 0230).
3. Install middle bottom guards (WP 0199).
END OF TASK
END OF WORK PACKAGE