TM 5-2410-241-23-3
0218
ACCESS COVER REMOVAL CONTINUED
6. Remove four bolts (Figure 2, Item 1), washers (Figure 2, Item 2), and cover (Figure 2, Item 3) from machine.
Figure 2. Cover.
0218
END OF TASK
LOWERING EQUIPMENT PROCEDURE
000218
WARN I N G
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing
any hydraulic fitting.
To prevent injury to personnel, wear protective eye covering and gloves.
Lubricating/hydraulic oils used in perfomance of maintenance can be very slippery.
r
Immediately wipe up any spills. Failure to follow this warning may result in injury to
personnel.
Machine equipment will move duing this procedure, to prevent injury to personnel ensure
r
adequate clearance is maintained.
Failure to follow these warnings may result in injury or death to personnel.
C AU T I O N
Cap and plug all hydraulic hose and tube ends along with component connections during
removal to protect against contamination. Failure to follow this caution may cause damage
to equipment.