TM 5-2410-241-23-3
0219
RESISTOR INSTALLATION
000219
1. Install resistor (Figure 10, Item 3) and two bolts (Figure 10, Item 4) on plate (Figure 10, Item 2) and guard
(Figure 10, Item 1).
Figure 10. Resistor.
0219
N OT E
Install connectors as tagged in removal.
2. Connect blower harness connector (Figure 11, Item 6) on resistor (Figure 11, Item 7).
3. Install plate (Figure 11, Item 4), guard (Figure 11, Item 1), two washers (Figure 11, Item 3), and bolts
(Figure 11, Item 2) on cover (Figure 11, Item 5).
Figure 11. Resistor Connection.
0219