TM 5-2410-241-23-3
0219
BLOWER MOTOR REMOVAL CONTINUED
7. Remove two bolts (Figure 8, Item 1), washers (Figure 8, Item 2), and bracket (Figure 8, Item 3) from cover
(Figure 8, Item 4).
8. Remove gasket (Figure 8, Item 5) from cover (Figure 8, Item 4). Discard gasket.
Figure 8. Gasket.
0219
END OF TASK
CLEANING AND INSPECTION
000219
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
BLOWER MOTOR INSTALLATION
000219
1. Install new gasket (Figure 8, Item 5) on cover (Figure 8, Item 4).
2. Install bracket (Figure 8, Item 3), two washers (Figure 8, Item 2), and bolts (Figure 8, Item 1) on cover
(Figure 8, Item 4).
