TM 5-2410-241-23-3
0238
REMOVAL CONTINUED
000238
5. Remove two cotter pins (Figure 2, Item 1), washers (Figure 2, Item 2) and link (Figure 2, Item 3) from control
valve (Figure 2, Item 4), and lever (Figure 2, Item 5). Discard cotter pins.
6. Remove three bolts (Figure 2, Item 10), washers (Figure 2, Item 9) and bracket (Figure 2, Item 8) from
machine.
N OT E
Note orientation of levers for ease of assembly.
7. Loosen bolt (Figure 2, Item 7) and remove lever (Figure 2, Item 5) from shaft (Figure 2, Item 6).
8. Repeat step 7 for other lever.
Figure 2. Bracket. (Hydraulic lines removed for clarity).
0238
END OF TASK
