TM 5-2410-240-23-2
0159
WINCH PRESSURE AND RETURN HOSE AND TUBES REMOVAL CONTINUED
N OT E
Tag and mark hoses and fittings to aid installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
Cap or plug hoses and open ports.
41. Remove eight bolts (Figure 12, Item 2), washers (Figure 12, Item 3), four clamps (Figure 12, Item 4), and two
hoses (Figure 12, Items 1 and 7) from winch piston pump (Figure 12, Item 6). Remove hoses from machine.
42. Remove two O-rings (Figure 12, Item 5) from hoses (Figure 12, Items 1 and 7). Discard O-rings.
Figure 12. Hoses and Retaining Hardware on Winch Piston Pump.
0159
END OF TASK
CLEANING AND INSPECTION
000159
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK