TM 5-2410-240-23-2
0159
WINCH PRESSURE AND RETURN HOSE AND TUBES REMOVAL CONTINUED
N OT E
Tag and mark hoses and fittings to aid installation.
Note orientation of fittings to aid installation.
Cap or plug hoses and fittings.
20. Loosen tube nut (Figure 10, Item 6) and disconnect hose (Figure 10, Item 7) from fitting (Figure 10, Item 8).
Remove hose from machine.
21. Loosen tube nut (Figure 10, Item 11) and disconnect hose (Figure 10, Item 12) from fitting (Figure 10, Item 3).
22. Loosen tube nut (Figure 10, Item 13) and disconnect hose (Figure 10, Item 12) from fitting (Figure 10, Item 8).
Remove hose from machine.
23. Remove fitting (Figure 10, Item 8) from valve bank (Figure 10, Item 10).
24. Remove three O-rings (Figure 10, Item 9) from fitting (Figure 10, Item 8). Discard O-rings.
25. Loosen tube nut (Figure 10, Item 14) and disconnect hose (Figure 10, Item 15) from fitting (Figure 10, Item 5).
26. Loosen nut (Figure 10, Item 4) and remove fitting (Figure 10, Item 5) from fitting (Figure 10, Item 3).
27. Remove O-ring (Figure 10, Item 9) from fitting (Figure 10, Item 5). Discard O-ring.
28. Remove nut (Figure 10, Item 2) and fitting (Figure 10, Item 3) from bracket (Figure 10, Item 1).
29. Remove two O-rings (Figure 10, Item 9) from fitting (Figure 10, Item 3). Discard O-rings.
Figure 10. Hoses and Fittings on Valve Bank and Bracket.
0159