TM 5-2410-240-23-2
0159
WINCH PRESSURE AND RETURN HOSE AND TUBES REMOVAL CONTINUED
N OT E
Tag and mark hoses and fittings to aid installation.
Note orientation of fittings to aid installation.
Note location of tiedown straps to aid installation.
Cap or plug hoses and fittings.
30. Remove tiedown straps (Figure 11, Item 16) from harness (Figure 11, Item 15) and bracket (Figure 11, Item 9).
Discard tiedown straps.
31. Loosen tube nut (Figure 11, Item 4) and disconnect hose (Figure 11, Item 5) from tube (Figure 11, Item 3).
32. Remove two bolts (Figure 11, Item 2) and washers (Figure 11, Item 1) from tube (Figure 11, Item 3).
33. Loosen tube nut (Figure 11, Item 14) and nut (Figure 11, Item 17) and disconnect hose (Figure 11, Item 13)
from tube (Figure 11, Item 3).
34. Remove nut (Figure 11, Item 17) and tube (Figure 11, Item 3) from bracket (Figure 11, Item 9). Remove tube
from machine.
35. Remove O-ring (Figure 11, Item 20) from tube (Figure 11, Item 3). Discard O-ring.
36. Loosen tube nut (Figure 11, Item 7) and disconnect hose (Figure 11, Item 6) from fitting (Figure 11, Item 8).
37. Loosen tube nut (Figure 11, Item 11) and nut (Figure 11, Item 10) and disconnect hose (Figure 11, Item 12)
from fitting (Figure 11, Item 8).
38. Remove nut (Figure 11, Item 10) and fitting (Figure 11, Item 8) from bracket (Figure 11, Item 9).
39. Remove two O-rings (Figure 11, Item 20) from fitting (Figure 11, Item 8). Discard O-rings.
40. Remove two bolts (Figure 11, Item 18), washers (Figure 11, Item 19), and bracket (Figure 11, Item 9) from
machine.
Figure 11. Tube, Hoses, Fittings, Bracket, and Retaining Hardware.
0159
