TM 5-2410-241-23-3
0216
REMOVAL CONTINUED
WARN I N G
Contact with oil can damage skin. Wear gloveswhen handling oil. If oil contacts skin, wash
it off immediately.
Lubricating oil is very slippery. Immediaely wipe up any spills. Failure to follow this
t
warning may cause injury.
Failure to follow these warnings may cause injury to personnel.
N OT E
Care must be taken to ensure that fluids ae contained during performance of inspection,
r
maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid
with suitable containers before opening any compartment or disassembling any
component containing fluids.
Dispose of all fluids accordingto local regulations and mandates.
Clean exterior of component to prevent contamination.
Plug all lines, hoses and tubes to prevent contamination.
Tag and mark lines to aid installation.
3. Loosen two tube nuts (Figure 2, Item 3) and remove line (Figure 2, Item 2) and two O-rings (Figure 2, Item 4)
from control manifold (Figure 2, Item 1). Discard O-rings.
Figure 2. Control Valve Line.
0216